AustraliaListed, local and safe classifieds market in Australia.
States
For Sale
Real Estate
Jobs

LED indoor mount PLUS 10W LED PIR motion sensing tube light in LEICHHARDT, New South Wales for sale

Refrigerators, ovens etc.

ITEM DESCRIPTION:
This combination includes a PIR motion detecting 10 Watt 1000 Lumen 240VAC LED tube plus a white steel T8 batten mount, ready to be connected to the mains. LED lights offer much higher output than traditional tungsten, halogen or CFL lamps and consume much less power. This cool white tube is as bright as a 120 Watt tungsten lamp.
Motion sensing LED tube specifications:
This is a well constructed, sensitive, bright and high quality 10W LED cool white LED tube, with inbuilt PIR motion sensor and clear polycarbonate lens. Powered by 240VAC, it is very suitable for use as entrance lights, for interior use in holiday homes or caravans, corridoors, toilets, carparks, stairwells, garages or carports.
This fits into the included batten mounting. The G13 connector pins can be rotated through 160 degrees so the tube is always aligned for maximum illumination and sensitivity to movement.
When movement is detected up to 4.0 metres away, this tube will change from 2.5W low intensity to a maximum of 10W, 900-1000 Lumen brightness for a period of approximately 30-40 seconds, then returns to minimal illumination mode if not retriggered.
Profile is T8 600(l) * 26(w) * 38(d)mm
Connectors are conventional G13 which are the same as fluorescent tubes
G13 pins on either end can be rotated through 160 degrees
Brightness is 900-1000 Lumen (equivalent to 100 Watt tungsten lamp)
Full power when triggered by movement is 10 Watts
Standby power when not triggered by movement is 2.5 Watts
Voltage 240 Volts AC
Power Factor >95
LED efficiency 90Lm/W
Colour temperature, cool white (6000-6500K)
LED types SMD 3014 quantity of 102
Life is 50,000 hours
Cover is clear, unmagnified, impact resistant polycarbonate
Construction is corrosion resistant 6061-T6 aluminium alloy
Temperature -10 ~ +45 degrees Celcius
Viewing angle 120 degrees
Enclosure specifications:
Steel, white powder coated enclosure for LED T8 600(l) * 26(d)mm 240VAC LED tube lamps, without diffuser cover.
This is a complete unit with two securing screws, 240VAC terminal block, standard G13 connectors and push through wiring holes at either end.
Voltage: 240 Volts AC
Power: 20 Watts maximum
Pins: 2 pins each end in G13 format, like fluorescent lamps
Dimensions: 660(l) * 90(w) * 95(h) assembled
Please note this is not wired for fluorescent lamps and does not include a ballast or starter.
For specifications see the Tychotek website http://www.tychotek.com.au